Jet Nozzles; Switching On / Off; Changing The Type Of Massage; Changing The Direction Of The Massage Stream - DURAVIT Jet Project Manual De Instrucciones

5.3 Jet nozzles

Switching on / off

Prerequisite: Water level 5 cm above the uppermost nozzle.
> Press the "Jet" button.
The nozzles are switched on / off.

Changing the type of massage

> Open the air regulator.
Air is added to the water massage.

Changing the direction of the massage stream

> Rotate the ball of the jet nozzle until you find the most pleasing direction for the
massage stream.

5.4 Switching the coloured LED spotlights (optional) on / off

CAUTION! Risk of eye injury from light beam.
> Do NOT look directly into the lighting elements.
> Press the "Light" button.
White light is switched on.
> Press the "Light" button a second time.
The rainbow coloured light programme is activated.
> Wait until the desired colour lights up and then press the "Light" button a third time.
The current colour is retained.
> Press the "Light" button a fourth time.
The light is switched off.
22