Switching On The Sound (Optional); Cleaning And Maintenance; Disinfecting The Whirlpool System; How Often - DURAVIT Jet Project Manual De Instrucciones

5.5 Switching on the sound (optional)

Prerequisite: Bluetooth-capable audio source with
> Switch on the main switch; the Bluetooth mode is activated.
> Activate the Bluetooth mode on your audio source as described in its operating
instructions.
> Search for the "Duravit" Bluetooth device and establish a connection to it.
> Enter the activation code: "2412".
> Select music and adjust the volume on your audio source.

6. Cleaning and Maintenance

Note!
The surfaces may be damaged by using the wrong cleaning agents.
• Never use abrasive, aggressive or chemical cleaning agents.
6.1

Disinfecting the whirlpool system

How often?

Disinfect the whirlpool system before using it for the first time, and then after every
tenth bath, but at least once a month and after a long period of no use.

How?

CAUTION! Chlorine bleach irritates the skin.
> Observe the safety instructions on the disinfectant.
> Do NOT bathe in the whirltub while disinfecting it.
> Ensure that the room is well-ventilated during the disinfection process.
> Fill the tub with water.
> Add 2% chlorine bleach to the water in accordance with the manufacturer's
instructions.
> Turn on jet nozzles for 5 minutes.
> Allow the water in the tub to settle for 5 minutes.
> Turn on jet nozzles for 5 minutes.
> Drain the water and rinse the tub.
protocol.
A2DP
23