System Requirements - Tripp-Lite B032-VU2 El Manual Del Propietario

System Requirements

• VGA, SVGA or Multisync monitor
• USB Keyboard
• USB Mouse
• Computer with a VGA port
• Computer with USB ports
Installation
Note: Make sure the power to all devices is turned off prior to installation. You must
unplug the power cords of any computers that have the Keyboard Power On Function.
1. Plug your USB keyboard, mouse and VGA monitor into the console ports
on the unit.
Note: If using a wireless keyboard and mouse, the dongle must plug into the unit's
keyboard port in order to use the hotkey function.
2. (Optional) A USB hub can be connected to the USB console mouse port,
allowing you to add multiple USB peripherals to your installation.
Note: To ensure proper functionality, use a hub with an external power supply. The
USB console mouse port supports USB 1.1 speeds.
3. Plug the USB and VGA connectors of the built-in cables into their
respective ports on the computers you are installing.
4. Power on your devices.
5. Switch between computers using the connected remote port selector.
17-10-490-933660.indb 3
3
12/4/2017 10:46:16 AM