Making Connections; Connecting To An Antenna/Cable Wall Jack; Connecting External Audio/Video Device; Connecting Pc - Haier 28E2000 Manual Del Usuario

MAKING CONNECTIONS

CONNECTING TO AN ANTENNA/CABLE WALL
JACK

CONNECTING EXTERNAL AUDIO/VIDEO DEVICE

Using HDMI cable (best)
NOTE
• An HDMI cable carries both video and audio. You do not
need to use any audio cables.
•
You can connect MHL devices, such as the Roku Streaming
Stick and compatible mobile phones and tablets to the
HDMI2(MHL) port. A USB to HDMI cable is required to
connect a mobile phone or tablet to the TV. Please check
the documentation of your device.
Using component cables (better)
Using composite cable (good)
NOTE
• Cables are often color-coded to match color-coded jacks.
MHL
HDMI2
COMPONENT OUT
L R Y P P
B R
COMPOSITE OUT
L R VIDEO
9

CONNECTING PC

CONNECTING HEADPHONES

NOTE
making connections.
To play from the external device:
1. Turn on the TV and the connected device.
2. Press INPUT to open the input source list, then press
to highlight the input to which the device was
connected and press OK to switch.
• Select TV to watch TV from the RF input.
• Select HDMI1, HDMI2(MHL) to play
from a device connected to the HDMI1,
HDMI2(MHL) input.
• Select Composite to play from the device
connected to the COMPOSITE input.
• Select Component to play from the device
connected to the COMPONENT input.
• Select VGA to play from the PC connected to the
PC AUDIO inputs.
PC
RGB
AUDIO
(L/R)