Ventilation; Starting-Up And Appliance Management; Before The First Use; Induction Principle - M-system MI-60 Manual Del Usuario

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the
calories brought out by the electronic system reach a certain level. The ventilation starts his
high speed when the hob is intensively used. The cooling fan reduces his speed and stops
automatically when the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is engaged, it produces a
variable electromagnetic field which produces inductive currents in the ferromagnetic bottom
plate of the pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted :
• All ferromagnetics pans are recommended (please verify it thanks a little magnet): cast
iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic
bottoms...
•
Are excluded : cupper, pure stainless-steel, aluminium, glass, wood, ceramic,
stoneware,...
The induction heating zone adapts automatically the size of the pan. With a too small
diameter the pans doesn't work. This diameter is varying in function of the heating zone
diameter.If the pan is not adapted to the induction hob the display will show [ U ].

Starting-up

To turn off the hob press first the [ 0/I ] key, then the heating zone [ + ]:
• Start-up/ switch off the hob :
Action
To start :
Touch the key
To stop :
Touch the key
• Start-up/ switch off a heating zone :
Action
Increase power
Decrease power
Stop
Control panel
touch the key [ 0/I ]
touch the key [ 0/I ]
Control panel
touch key [ + ]
touch key [ - ]
touch simultaneous [ + ] and [ - ]
20
Display Control light
[ 0 ] switch on
nothing or [ H ] switch off
Display
[ 1 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]