Product Description; Power Linking - Chauvet DJ DJ BANK Guía De Referencia Rápida

Product Description

The DJ Bank is a compact strip light with sound-active mode and fully automatic programs; it includes an all-on and
chase switch.
AC Power
This product has a fixed voltage power supply that works with an input voltage of 120 V, 60 Hz or 230 V, 50 Hz,
depending on the model.
To eliminate wear and improve its lifespan, during periods of non-use completely disconnect the
product from power via breaker or by unplugging it.

Power Linking

You can link up to 30 DJ Bank products at 120 V or 60 products at 230 V. Power linking cords can be purchased
separately.
Fuse Replacement
1. Disconnect the product from power.
2. Wedge the tip of a flat-head screwdriver into the slot of the fuse holder.
3. Pry the safety cap out of the housing.
4. Remove the blown fuse from the clip on the front of the safety cap and replace with a fuse of the exact same
type and rating.
5. Re-insert the fuse holder and reconnect power.
DJ Bank QRG Rev. 4
QUICK REFERENCE GUIDE
EN
2