2
Operation
When using the appliance for the
first time, smoke can develop due
to production residues. However,
this does not mean the appliance is
C
defective. The first time you switch
it on use the appliance as you nor-
mally would but without bread. It is
recommended to use the medium
setting of the browning control (6).
Ensure for proper room ventilation.
C
Pushing 1 from the browning control
(6) will give the lightest degree of
browning and pushing 7 the darkest.
To cancel the toasting process
C
before it has finished, press the
stop button (5). The start lever (2)
springs back up and the toast slices
can be taken out of the toaster.
After the start lever (2) springs back
C
up, you can use the high-lift func-
tion by pushing the start lever (2)
upwards.
WARNING: Be very careful when
A
taking the toast slices out of the
toaster as the metal parts of the
toaster and also the bread can be-
come very hot.
If toast slices get stuck in the toast-
er, switch the toaster off immedi-
ately by pressing the stop button (5).
Pull the power plug out of the wall
C
socket. Let the toaster cool down
completely. Carefully try to take the
bread out of the toaster without
damaging the sensitive heating el-
ements and other parts. Do not use
any electroconductive objects to
remove the bread from the toaster.
10 / EN
WARNING: Be very careful when
A
taking the toast slices out of the
toaster as the metal parts of the
toaster and also the bread can be-
come very hot.
If you accidentally activate the
wrong mode (defrost instead of re-
C
heat or reheat instead of defrost),
then the selected mode must be
cancelled first by pressing the stop
button (5) before you can select the
right mode.
Toaster / User Manual