Specifications - Dynex DX-ESATAP Guia Del Usuario

Specifications

Symptom
An eSATA
peripheral is not
detected by the
computer
Specifications
Chipset
Interface
Power port
Internal
System
environment
System
requirements
Certification
Right-click the My Computer icon on your desktop, click
Properties, then click the Device Manager. If the SATA
peripheral is listed in the Device Manager, it should be
working correctly.
If it is shown as an unknown device, the cause may be a
defective eSATA peripheral or its software drivers. Do the
following:
• Check the eSATA connection and try a different eSATA cable.
• Check your SATA device's power source, and make sure that it
provides enough power for your SATA device to run stably. Refer
to the SATA peripheral's user guide for the power supply
specifications.
• Uninstall your SATA device, then reinstall the SATA device driver.
• Make sure that the SATA device is using a current driver. You can
download current driver software from the manufacturer's Web
site.
Silicon Image 3132
One-lane PCI Express bus
External: 2 × Ø1.3 DC Jack
1 × 4-pin power connector
Operating temperature: 41°F~104°F (5°C~40°C)
Operating humidity: 20%~80% RH
Windows XP, Windows Vista; Mac 10.4.x or higher
FCC Class B, ICES-003
Possible Solution
13