LG WM3875HVCA Manual Del Propietário página 16

H ow to use washer
The LCD display shows the settings, estimated
time remaining, options, and status messages for
your washer. When the washer is turned on, the
light in the display will illuminate.
1. STATUS/CYCLE DISPLAY
This portion of the display shows the selected cycle,
operating status, and special messages.
If a cycle has special instructions, they will also be
displayed in this area.
2. ESTIMATED TIME REMAINING
When the START/PAUSE button is pressed, the
washer automatically detects the wash load (weight)
and optimizes the washing time, based on the
selected cycle and options. The display will then
indicate the estimated time remaining for the
selected wash cycle.
NOTE: The cycle time displayed may appear much
longer than that of a top-loading washer.
The displayed time is for the complete cycle, rather
than just the agitation portion of the cycle, as is
typically shown on a top-loading washer.
3. CYCLE COMPLETION INDICATOR
Shows how much of the current wash cycle has
been completed.
4. DOOR LOCK INDICATOR
Indicates that the door is locked. The washer door
will lock while the washer is operating. The door can
be unlocked by pressing the START/PAUSE button
to stop the washer.
NOTE: If the temperature in the washer is too high,
the door cannot be unlocked until the washer has
cooled. If the water level is too high, select the Drain
& Spin cycle (see the page 19 for details) to drain
excess water. Do not try to force open the door.
5. CHILD LOCK INDICATOR
When CHILD LOCK is set, the Child Lock indicator
will appear and all buttons are disabled except the
ON/OFF button. This prevents children from
changing settings while the washer is operating.
16
THE LED DISPLAY
3
1
6. STEAM INDICATOR
This indicator shows that the washer has been set
for the STEAM option.
7. PRE-WASH INDICATOR
This indicator shows that the washer has been set
for the PRE-WASH option.
8. WATER PLUS INDICATOR
This indicator shows that the washer has been set
for the WATER PLUS option.
9. DRUM LIGHT INDICATOR
This indicator shows that the washer has been set
for the DRUM LIGHT option.
10. WASH/RINSE
This indicator shows that the washer has been set
for the WASH/RINSE OPTIMIZER™ option.
11. CYCLE SETTING INDICATORS
These indicators show the current cycle settings for
WASH/RINSE, SPIN SPEED, SOIL LEVEL, and
BEEPER. To change these settings, press the
appropriate settings button.
NOTE: To protect your garments, not every wash/
rinse temperature, spin speed, soil level, or option is
available with every cycle.
4 5
11
OPTIMIZER™ INDICATOR
6 7 8 9 10
2