LG WM3875HVCA Manual Del Propietário página 21

H ow to use washer
CUSTOM PROGRAM
If you have a special combination of
settings that you use frequently, you
can save these settings as a CUSTOM
PROGRAM.
To Save a Custom Program:
Turn on the washer and turn the cycle selector
knob to select the desired cycle.
Use the cycle setting buttons to adjust the settings
for that cycle. Set any other desired options.
Press the cycle option button(s) for the option
you would like to add. A confirmation message
will be shown in the display.
Press and hold the CUSTOM PROGRAM button
for 3 seconds.
NOTE: You may only save one custom program at
a time. Pressing and holding the CUSTOM
PROGRAM button will overwrite any previously
saved custom program.
To Recall a Custom Program:
Turn on the washer.
Press the CUSTOM PROGRAM button.
Press the START/PAUSE button to start the cycle.
SECONDARY FUNCTIONS
The special function buttons also activate secondary
functions, including CHILD LOCK, DRUM LIGHT,
WASH/RINSE OPTIMIZER™, and LANGUAGE.
Press and hold the button marked with the
secondary function for 3 seconds to activate.
CHILD LOCK
Use this option to prevent unwanted
use of the washer or to keep cycle
settings from being changed while the
washer is operating. Press and hold the STAIN
CARE button for 3 seconds to activate or
deactivate the child lock function.
The child lock indicator will be shown in the
display, and all buttons are disabled except the
ON/OFF button.
NOTE: CHILD LOCK lasts after the end of cycle.
If you want to deactivate this function, Press and
hold the STAIN CARE button for 3 seconds.
DRUM LIGHT
The drum is equipped with a blue LED
light that illuminates when the washer
is turned on. This light automatically
turns off when the door is closed and the cycle
starts. To turn on the light during a cycle, press
and hold the DELAY WASH button for 3 seconds.
The drum light will illuminate and then turn off
automatically after 4 minutes.
WASH/RINSE OPTIMIZER
This function can adjust washing & rinsing
time efficiently by checking the level of
detergent and degree of hardness.
Press and hold the EXTRA RINSE button for 3
seconds to activate or deactivate WASH/RINSE
OPTIMIZER™.
Excessive detergent amount: rinsing cycle is
increased.
Insufficient detergent amount: washing time is
increased.
A small amount of remaining detergent detected,
additional rinsing will be added.
LANGUAGE
This option allows you to change the
language shown in the display. Once set,
the selected language will stay set even
after the power is turned off.
The display language options are English, French,
and Spanish; English is the default language.
To change the language:
Press the ON/OFF button to turn on the washer.
Press and hold the OPTION button for 3 seconds,
until the following screen appears in the display.
When OPTION is pushed, English is displayed
as the default language.Press the FRESH CARE
button to select FRANÇAIS (French) or
COLDWASHTM for ESPAÑOL (Spanish).
TM
21