TECHNICAL DATA
Type AR230D (PGA-designation of machinery, representative of grinder)
Voltage
Power input
Rated speed
Disc size
Disc bore
Spindle thread
Protection class
Machine weight
NOISE INFORMATION
A weighted sound pressure
A weighted sound power
K
& K
PA
WA
Wear ear protection when sound pressure is over
VIBRATION INFORMATION
Vibration total values (triax vector sum) determined according to EN 60745:
Typical weighted vibration
WARNING: The vibration emission value during actual use of the power tool can differ from
the declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool is
switched off and when it is running idle but not actually doing the job. This may significantly reduce the
exposure level over the total working period.
Helping to minimize your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
28
Vibration emission value a
Uncertainty K = 1.5m/s²
C or less.
0
230-240V~50Hz
= 6.95m/s
2
h, AG
2350W
6,500/min
230mm
22.2mm
M14
/II
4.52 kg
L
: 87dB(A)
pA
L
: 98dB(A)
wA
3.0dB(A)
80dB(A)