Hauck Cruiser Instrucciones Para El Uso página 9

INStRUCtIoN oF USE
Part List (Photo 1):
Please check the list of parts to ensure that all parts have been delivered:
Stroller main frame with Seat unit
1 front bar
4 wheels
1 canopy
1 footrest
1. UNFoLDING (fig. 1a-c)
Release the transport lock (1a). Lift up the stroller's handle to open the stroller (1b) until the
locking latches on both sides have locked in place (1c).
 .WHEELS ASSEMBLY (fig. )
Insert the wheels onto the front & rear wheel axles. Make sure the pushpin locks in place and
cannot be pull off. When changing the wheel, press the quick release adjustor and pull the
wheel out.
3. BRAkE (fig. 3)
You can press either the front wheel brake or rear wheel brake to stop the stroller. Press the
brake down by foot to stop the stroller and push the stroller to check.
Attention: Always apply brake(s) when parking the stroller.
4. ADjUStING tHE BACk RESt (fig. 4)
Pull the metal handle upwards and adjust the back rest to desired position. the back rest can
be altered to 3 different positions.
5. FIX & ADjUStING tHE LEG RESt (fig. 5a-5d)
Insert the leg rest tubes (left & right sides) into the leg rest plastic housings, ensure the push
pins are securely locked (5a), then fix the strap underneath the seat (5b), further secure by the
elastic band onto the footrest (5c). to adjust the leg rest, press both (left & right) buttons to bring
the leg rest to the desired position (5d).
6. INStALL tHE FRoNtBAR (fig. 6)
Install the front bar by pushing it into the housings (6). You will hear a click sound when they are
secured onto the frame. test the front bar by pulling on it to make sure it is locked into place.
the front bar can be adjusted to different position by press the adjustors on the  sides.
1. ADjUSt tHE HANDLE (fig. 7)
Press both (left & right) buttons on the handle and bring the handle height to the desired
position.
1. ASSEMBLE tHE CANoPY (fig.8 )
Insert the canopy plastic clamps into the housings on the  sides of the seat
. REVERSING tHE HANDLE (fig. 9a-9c)
twist both (left & right) adjustors (9a) on the handle to release the handle position (9b). then
swivel the handle to the opposite direction (9c). Please always take care the handle has engaged
in the new position completely. Front & rear wheels must be additionally secured with both of
the parking brakes when parking the stroller, if the handle is in the position facing towards the
child.
3. FoLDING AWAY (fig. 10a-10d):
Apply the brake on the stroller first. Press the second lock button (10a), then pull the folding
latches (left & right sides) upwards (10b). Press the handle down to fold the stroller (10c). the
transport lock will automatically engaged with the stroller is completely folded (10d)
4. SECURE tHE CHILD IN tHE SEAt (fig 11):
Place the child in the seat and push the clips on the waist belt into the buckle on the crotch belt
(the one that comes between the child's legs). Adjust the length of the belt to your child's needs.
Always ensure the straps are not twisted or caught on the stroller frame. Check the adjustment
every time you place the child in the seat and when the backrest is reclined. to release the
harness, squeeze & open the buckle.
Harness adjustment: Insert both fasteners (B) into the buckle (A), ensure that both buttons click
into position. Ensure both shoulder straps (C) are attached to the fasteners (B). Each strap has
its own length adjuster (D). to undo the harness, press the buttons and pull apart. "D" Rings
are provided for fitment of a full safety harness. the attachment points (D-rings) are located
on side straps.
WARNING: (A child's safety is your responsibility.) the child should be harnessed in at all times
and should never be left unattended. the child should be clear of moving parts while making
adjustments. this stroller requires regular maintenance by the user.
Attention: Avoid serious injury from failing and sliding out, always use seat belt & always use
as instructed. Never use the harness without the shoulder straps.
5. FAStENING tHE  IN 1 SoFt CARRY Cot (optional accessory) (fig. 1a-1c)
Do not place any additional mattress in the soft carry cot. the soft carry cot should be securely
fixed by the attached plastic hooks to the D-rings, which are on the stroller seat (fig 1a). then
further secure the carry cot by fasten the nylon strap from the carry cot to the backrest of the
stroller (fig. 1b-1c).
GB
9