Kit Assembly - Metra 99-8244HG Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Secure the pocket to the radio brackets
with the (4) #8 x 3/8" Phillips screws
supplied. (Figure A)
2. Slide the radio onto radio brackets and
secure with the screws supplied with the
radio. (Figure B)
3. Secure the radio/pocket/bracket assembly
to the radio housing/climate control
assembly with the factory hardware.
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to the
radio. Metra recommends using the proper
mating adapter from Metra and/or AXXESS.
Test the radio for proper operation .
5. Reassemble the dash in reverse order of
disassembly

KIT ASSEMBLY

(Figure A) (Figure B)
REV. 11/6/2017 INST99-8244HG
7