Setting The Temperature - Dometic CF35 Instrucciones De Uso

Operation
➤ Press the "ON/OFF" button (fig. 3 1, page 3) for between one and two
seconds.
✓ The "POWER" LED lights up.
✓ The display (fig. 3 5, page 3) switches on and shows the current cooling
temperature.
I
NOTE
The temperature displayed is that of the middle of the interior.
The temperatures elsewhere can deviate from this temperature.
✓ The cooler starts cooling the interior.
I
NOTE
When operating with the battery, the display switches off automatically
if the battery voltage is low. The LED "POWER" flashes orange.
Locking the cooler (CF35, CF40)
➤ Close the lid.
➤ Press the lock (fig. 2 1, page 3) down, until it latches in place audibly.
6.6

Setting the temperature

➤ Press the "SET" button (fig. 3 4, page 3) once.
➤ Use the "UP +" (fig. 3 6, page 3) and "DOWN –" (fig. 3 7, page 3) buttons to
select the cooling temperature.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
16
CF35, CF40, CF50
EN