Setting The Temperature - Dometic CFX Serie Instrucciones De Uso

Operation
Latching the cooler lids
➤ Close the lids.
➤ Press the latches (fig. 2 1, page 2) down, until they latch in place audibly.
I
NOTE – Alarm "Lid open"
If a lid is left open for three minutes or more and the device is switched
on, the respective interior light will flash until the lid is closed.
7.6

Setting the temperature

➤ Press the "SET" button (fig. 3 4, page 2):
– once for the large compartment
– twice for the small compartment
✓ The display of the respective compartment blinks.
➤ Use the "UP +" (fig. 3 10, page 2) and "DOWN –" (fig. 3 9, page 2) buttons
to select the cooling temperature.
You can adjust the cooling temperature so that each compartment works as a
refrigerator compartment or as a freezer compartment.
✓ The cooling temperature appears in the display for a few seconds. The display
flashes several times and then the current temperature is displayed again.
I
NOTE
The temperature of each compartment can be set to –22 °C. The
manufacturer however recommends a cooling temperature of –15 °C to
–18 °C for normal usage and optimum energy consumption.
18
CFX75DZW, CFX95DZW
EN