English (Original Instructions) - DeWalt DW754 Manual Del Usuario

EngLIsh
TOOL GRINDING AND HONING MACHINE
DW754
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
UK & Ireland
Type
Rated current
Motor power (input)
Motor power (output)
No-load speed
Max. wheel diameter
Max. wheel width
Wheel bore
Weight
Noise values and vibration values (triax vector sum) according to EN61029:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound level)
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.

WARNING: The declared vibration emission level
represents the main applications of the tool. However if
the tool is used for different applications, with different
accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to vibration should
also take into account the times when the tool is switched
off or when it is running but not actually doing the job.
This may significantly reduce the exposure level over the
total working period.
Identify additional safety measures to protect the operator
from the effects of vibration such as: maintain the tool
and the accessories, keep the hands warm, organisation
of work patterns.
18
EC-Declaration of Conformity
Machinery Directive
WALT one of the
e
Tool Grinding and Honing Machine
DW754
DW754
V 230
D WALT declares that these products described under
AC
e
V 230/115
Technical Data are in compliance with:
AC
2006/42/EC, EN61029-1:2009 +A11:2010, EN61029-2-4:2011.
2
These products also comply with Directive 2014/30/EU and
A 1.86
2011/65/EU. For more information, please contact D
W 415
the following address or refer to the back of the manual.
W 300
The undersigned is responsible for compilation of the technical
min 2750
-1
file and makes this declaration on behalf of D
mm 125
mm 25
mm 20
kg 9.3
Markus Rompel
Director Engineering
D WALT, Richard-Klinger-Straße 11,
e
dB(A) 56
D-65510, Idstein, Germany
15.03.2018
dB(A) 69
dB(A) 3.0
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.





WARNING: To reduce the risk of injury, read the
instruction manual.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.
Denotes risk of electric shock.
Denotes risk of fire.
WALT at
e
WALT.
e