Replace Filters For The Econoneb/Turboneb; Replace Fuse; Servicing - Clement Clarke International MEDIX AC2000 Manual De Instrucciones

6.5 Replace filters for the Econoneb/Turboneb 2

Inlet filter:
Using the filter spanner, unscrew your used, white, inlet filter in an anti-clockwise
direction and discard.
Replace with a new filter, ensuring you have the white inlet filter.
Screw the white inlet filter, into the left-hand hole on the front panel, in a clockwise
direction, tightening with the filter spanner.
Outlet filter:
Using the filter spanner, unscrew your used, blue, outlet filter in an anti-clockwise
direction and discard.
Replace with a new filter, ensuring you have the blue outlet filter.
Screw the blue outlet filter, into the right-hand hole on the front panel, in a
clockwise direction, tightening with the filter spanner.

6.6 Replace Fuse

1. Switch off at mains.
2. Using a screwdriver or a coin, push and twist fuse in an anti-clockwise direction to
extract fuse.
3. Replace with new fuse.

6.7 Servicing

In order to maintain your warranty, your unit is required to be serviced by an approved service agent
every 12 months. Please contact the manufacturer or distributor for details of your nearest authorised
service agent.
Warning: Disconnect power supply before servicing. When servicing, use only identical
replacement parts. Not suitable for use with flammable anaesthetics.
Caution: Do not immerse in water.
Please Note: When returning your nebuliser for servicing to Clement Clarke International, please
contact customer services for an authorised returns number.
Please do not return your consumables when returning your nebuliser for servicing.
The compressor nebuliser case should be wiped clean with an approved CE marked disinfectant
wipe, before returning for servicing.
en
7