DeWalt DW896 Manual De Instrucciones página 2

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR
ANY DEWALT TOOL, CALL US TOLL FREE AT:
I=800=4=DEWALT (1=800=433=9258)
PADDLE
SWITCH
I
PUNCH
Irnportaret Safety Instructiores
_ WARNING: When using electric tools, basic safety precautions
should always be followed to reduce risk of fire, electric shock,
and personal inju_ including the following:
READ A££ INSTRUCTIONS
Double Iresulation
Double insulated tools are constructed throughout with two separate
layers of electrical insulation or one double thickness of insulation
between you and the tool's electrical system. Tools built with this
insulation system are not intended to be grounded. As a result, your
tool is equipped with a two prong plug which permits you to use
extension cords without concern for maintaining a ground connection.
NOTE: Double insulation does not take the place of normal safety
precautions when operating this tool. The insulation system is for
added protection against injury resulting from a possible electrical
insulation failure within the tool.
.&CAUTION: WHEN SERVICING USE ONLY IDENTICAL
REPLACEMENT PARTS. Repair or replace damaged cords.
Polarized Plugs
Polarized plugs (one blade is wider than the other) are used on
equipment to reduce the risk of electric shock. When provided, this
plug will fit in the polarized outlet only one way. If the plug does not fit
fully into the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not change the plug
in any way.
Safety Instructieres For All Tools
* KEEP WORKAREA CLEAN. Cluttered areas and benches invite
injuries.
* CONSIDER WORKAREA ENVIRONMENT. Don't expose power
tools to rain. Don't use power tools in damp or wet locations. Keep
work area weft fit. Do not use tool in presence of flammable liquids
or gases.