Aqua Rinse/End Of Cycle Beeps - Fisher & Paykel WL37T26D Instructivo De Instalación Y Guía De Usuario

changing pre-set options
30
Aqua Rinse
On the High Efficiency cycles you can
change the pre-set rinse option.
The pre-set rinse option on these cycles
is a water efficient Aqua shower rinse.
This rinse can be doubled to provide
a more intensive rinse for people with
sensitive skin.
Enter the Option Adjustment mode (refer to page 28).
1
Press BLEACH to change to a double Aqua rinse.
2
Press POWER to save your selection.
3
End of cycle beeps
The number of beeps that signal the
end of the cycle can be altered. Choose
between no beeps, five or fifteen beeps.
The DELAY START button adjusts the
cycle signal setting.
Enter the Option Adjustment mode (refer to page 28).
1
Press the DELAY START button to adjust the cycle signal setting.
2
Press POWER to save your selection.
3
Rinse Options
Bleach light on
Bleach light off
End of cycle Beeps
1hr light
3hr light
9hr light
Double Aqua Rinse
Aqua Rinse
No beeps
5 beeps
15 beeps