Troubleshooting - Beta Max Beta Lite Manual Del Usuario

Beta Max portable hoists are designed to operate consistently and trouble-free. In the event
the hoist does not operate or operates inconsistently, the following troubleshooting guide will
aid in correcting the problem.
CAUTION
Before attempting to troubleshoot the portable hoist, read and understand all the information in the
Safety section.
Problem
Hoist will not
operate when
pressing either the
UP or DOWN
push buttons;
hoist motor
makes no sound.
Hoist makes
excessive
vibrating noise.
www.betamaxhoist.com
1-800-233-5112
Chapter 8

Troubleshooting

Table 8.1
Possible Cause
No electrical power, LED not lit.
Unit has been used continuously
for more than 20 minutes and has
exceeded the recommended 50
percent Duty Cycle.
Wire rope has come off the drum.
Brake fan blade broken.
Nuts and bolts securing the
shroud and housing have come
loose.
Solution
Check all circuit breakers, fuses,
and electrical cord connections to
ensure all are functioning
properly and are not damaged.
Allow motor to cool for 20
minutes before using.
Check the wire rope to ensure it is
properly spooled onto the drum.
Inspect brake fan.
Check all nuts and bolts and
tighten if needed.
8-1