Parts List For 1200-Pound (544-Kg) Capacity Trestle Monorail; Assembling The 1200-Pound (544-Kg) Capacity Trestle Monorail - Beta Max Beta Lite Manual Del Usuario

Parts List for 1200-Pound
1. Two Trestle Monorail uprights (A)
2. One Scaff-Trac Monorail (B)
3. Four Trac mounting pins with keepers (C)
4. Four 1200-pound capacity braces (D)
5. Two capscrews (E)
6. Four capscrews and nuts (F)
7. One hoist stop pin with keeper (K) (not shown)
Assembling the 1200-Pound
1. Attach one end each of the four braces (D) to the sides of both uprights (A)
using capscrews and nuts (F). Hand-tighten nuts only.
2. Join the free end of the braces (D) together on one side in the center using
capscrews (E). Hand-tighten only. This is a temporary support step.
3. Join the free end of the other two braces (D) together on the other side in the
center using capscrews (E). Hand-tighten only. This is a temporary support
step.
4. Measure and space the uprights (A) approximately 7 feet (2.1 meters) apart.
5. Place one end of the Scaff-Trac Monorail (B) in position to one of the uprights
(A) by aligning the Trestle Monorail bracket to the upright.
6. Lift up the Trestle Monorail (B) and slip the bracket into position on the
bottom side of the upright (A).
7. Secure the Scaff-Trac Monorail (B) to the upright (A) by inserting two pins (C)
through the Trestle Monorail brackets.
8. Insert the keepers (C) into the pins.
9. Repeat Steps 5 - 8 for attaching the other end of the Scaff-Trac Monorail (B) to
the remaining upright (A).
www.betamaxhoist.com
1-800-233-5112
Capacity Trestle Monorail
(544-kg)
Capacity Trestle Monorail
(544-kg)
5-25