Height Adjustment; Tilt Adjustment; Maintenance And Cleaning - Oster OSF1613MB Manual De Instrucciones

1. Set fan on a dry, level surface.
2. Plug power cord into the appropriate outlet.
3. Turn the knob at the top of the motor housing to select the desired fan speed or turn it
off: "0" for Off, "1" for Low Speed, "2" for Medium Speed, and "3" for High Speed.
4. To oscillate the fan head, push the oscillation button "
housing down. To stop the oscillation, pull the oscillation button "

Height Adjustment

This fan is equipped with an expandable pole, which allows you to adjust the height of the
fan according to your preference.

Tilt Adjustment

To change the tilting angle of the fan head, move the fan head manually to the desired
angle.

MAINTENANCE AND CLEANING

Follow these instructions to correctly and safely care for your fan.
• Always unplug the fan before cleaning or disassembling.
• Be sure to clean your fan with a soft cloth moistened with a mild soap solution.
• Do not allow water to drip on or enter into the fan housing.
• Do not use gasoline, thinner, or benzene as a cleaner.
• Lightly run a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that
may have accumulated.
Fan Blade Cleaning Instructions
This fan is equipped with a removable grill that allows the consumer to remove the grill
and its components without the need of any tools.
Make sure the fan is unplugged before disassembling and cleaning the fan blade.
Carefully remove the front grill. Wipe the blade with a soft cloth moistened with a mild
soap solution. DO NOT allow any liquid to drip into or enter the motor housing. Snap the
front grill onto the fan. Make sure all parts are secured prior to operating the fan.
OSF1613MW_MB_13ESM1.indd 5
OPERATING INSTRUCTIONS
ADJUSTMENT INSTRUCTIONS
CLEANING AND MAINTENANCE
4
" at the top of the motor
" up.
7/18/13 8:53 AM