Placing The Speakers - Yamaha NS-50F Manual De Instrucciones

Ocultar thumbs Ver también para NS-50F:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Placing the Speakers

Place the speakers on a sturdy, vibration-free
surface.
■ Using as Normal Stereo Speakers
To get the best stereo performance, angle the
speakers inward so as to create a triangle, with the
listener at the apex.
■ Using as Front Speakers in a
Surround Sound System
Position the speakers both side of your TV. The
positioning of these speakers is important because
they provide a solid anchor for the sound image.
They should be positioned facing the listener at
about ear level, and equidistant from the TV.
NS-50F
Subwoofer
Center
Surround L
Attaching the Stands
When placing the speakers, be sure to use the
stands to increase stability.
Use the 8 specified holes located on the base of
the speaker.
■ Procedure:
1. Put the screw through the inner hole of the
stand, and screw it into the outside hole of
the speaker. Do not tighten too much at this
point.
2. Put a screw through the outer hole on the
3. Tighten both of the screws firmly.
4. Attach a pad to the bottom of the end
5. Attach the other stands to the other corners
Surround R
Note:
Be careful not to apply force to the side of the speaker,
otherwise the speaker may fall causing damage to the
speaker or personal injury.
Outer hole
Inner hole
stand, and screw it into the other hole on
the base of the speaker.
portion of the stand.
of the base of the speaker in the same way
and confirm that all 4 stands have been
firmly attached.
4
1
2
3
E-

Publicidad

Tabla de contenido
loading

Tabla de contenido