Saurium HSD1G-75 Manual De Instrucciones página 62

knocking or clanging can be heard with high loads. This is normal and no cause
for alarm. If ignition knocking or clanging occurs during normal loads and with
constant motor speed you should change the petrol quality. If this does not
solve the problem contact an authorized specialist dealer.
When working at continuous high revs a higher octane rating is recommended.
Check the air cleaner
Check the air filter to be sure it is clean and in good condition.
Remove the air cleaner cover, then check the main air filter. Clean or replace
the air filter if necessary.
Adjustment of height and angle of Handlebars
Attention：Before adjusting the height and angle of handlebar, please put the
machine on flat floor to avoid it being dumped.
unscrew the adjustment handlebar to adjust the height and angle of handle.
Adjustment of tilling depth
Depth adjustment
Draw out the B-shape lock and pin, adjust the resistance pole to an appropriate
position, then replace the pin and fix with B-shape lock.
Use and adjustment of forward clutch handlebar（Left Handlebar）
Attention：Before using it, please reduce the speed.
61