Preparing A Wireless Antenna; Connecting The Power Cord; Turning On The Power To The Unit - Yamaha NP-S303 Guia De Inicio Rapido

2

Preparing a wireless antenna

If you connect the unit to a wireless network and use the Bluetooth function, set the
wireless antenna in the upright position.
NOTE
• Do not apply excessive force to the wireless antenna. Doing so might damage the antenna.
3

Connecting the power cord

After all the connections are complete, connect the supplied power cord to the AC IN
jack on this unit, and then plug into a home AC outlet.
power cord (supplied)
This unit (rear)
AC IN
* Illustration above shows Europe model.
4

Turning on the power to the unit

To turn on the power to the unit, press z (power) on the front panel.
z (power)
When you turn on the power to the unit for the first time after you purchase or initialize it,
the unit will indicate "WAC" on the display.
Press the RETURN key to clear this indication and proceed to the next page.
WAC (Wireless Accessory Configuration)
WAC
NP-S303 XXXXXX
NOTE
• "WAC" is a function that enables the unit to share the network settings of an iOS device (iPhone) to
To an AC wall outlet
facilitate connection to a wirelesss network.
For more information, refer to the Owner's Manual.
ENTER
SOURCE RETURN
Wi Fi
USB BLUETOOTH
CONNECT
5V A
SELECT
PUSH
En
13