Preparing To Connect To A Network; Connecting A Network Cable; Preparing A Wireless Antenna - Yamaha NP-S303 Manual De Instrucciones

2

Preparing to connect to a network

On this unit, you can tune in to an Internet radio station, or play music files that are
stored on your PC or a Digital Living Network Alliance (DLNA) server (such as a
Network Attached Storage (NAS) device).

Connecting a network cable

To use a wired network, connect the unit to your router with a commercially-available
STP network cable (CAT-5 or higher straight cable).
Internet
Modem
Wireless
router
ANALOG OUT DIGITAL OUT NETWORK
COAXIAL OPTICAL
R
NOTE
• To switch from a wireless network connection to a wired network connection, change "Connection"
under "Network" in the Setup menu to "Wired" (page 43).
Network Attached Storage
(NAS)
WAN
PC
LAN
Network cable
This unit (rear)

Preparing a wireless antenna

If you connect the unit to a wireless network and use the Bluetooth function, set the
wireless antenna in the upright position. For information on how to connect the unit to a
wireless network, see "Connecting the unit to the network" (page 21). For information
on how to connect the unit to a Bluetooth device, see "Listening to music via Bluetooth"
(page 37).
NOTE
• Do not apply excessive force to the wireless antenna. Doing so might damage the antenna.
19
En