Description; Optional Accessories; Required Tools; Driller - Société JPF CCJ Sprayer Manual Del Usuario

Description

The CCJ Sprayer is delivered with several
accessories:
A. Stainless steel cover
B. Shoulder strap
C. Stainless steel tank
D. Female socket
E. Coupling
F. Washer and seal bearing
G. Nozzle 1 (joints from 5 to 12mm)
H. Nozzle 2 (joints from 12 to 18mm)
I. Nozzle 3 (joints from 18 to 30mm)
J. Pipe knee adjustable at 360°
K. Plastering tip Ø 12mm
L. Plastering tip Ø 8 mm
M. Plastering nozzle
N. Air valve
O. Endless screw
P. Bearing tap
Q. Pipe clip

Optional accessories

1) The Rolling Support
The Rolling Support is available as an op-
tion. It eases ground jointing by removing
the weight of the machine from the user
shoulders. You can find more informations
on https://jpfcombi.com.
2) Droplet nozzle
For spraying decorative coatings
with a granite appearance in
aqueous phase for interiors. Ideal
for the economical decoration of
premises for private or collective
use. Air consumption 120 liters / mi-
nute min.

Required tools

To prepare mortar:
Trowel, Mixer or Cement mixer.
In jointing modus: Pointing trowel, caulking
trowel, brush or a sponge for finish.
In plastering modus: Trowel, finishing trowel,
float (smooth or crushed finish)
Spiked float (scratched finish)

Driller

A driller is required to rotate the endless
crew.
It must have a speed variator. Having a re-
movable handle is preferable to be able to
equip the driving finger (See "Assembly")
and create a monobloc machine.
- En utilisation jointoyeuse, une puissance
minimale de 300 watts pour une perceuse à
fil ou un minimum de 14 volts pour une per-
ceuse sur batterie.
Utiliser le variateur de vitesse pour effectuer
entre 300 et 500 tours par minute.
13