Mounting The Equipment Board Fs Trapeze - Loewe Equipment Board FS Trapeze Instrucciones De Montaje

7
8
a
9
b
10
a
a
b
a
b
Mounting the Equipment Board FS
Trapeze
Procedure
Loosen the two screws, fi g. 7, arrow a.
Remove the weight (fi g. 7, arrow b) from the Floor Stand
Trapeze.
Remove the two screws (fi g. 8, arrows a) from the Equipment
Board and remove the cover (fi g. 8, arrow b).
There are two screws in the scope of delivery (page 6, fi g. 2).
Mount the Equipment Board on the Floor Stand Trapeze with
these two screws.
Place the open Equipment Board on the Floor Stand Trapeze
as shown in fi g. 9.
Place the previously removed weight (fi g. 9, arrow b) on the
holders in the Equipment Board.
Turn the two screws in with the wrench provided (page 6,
fi g. 3, size 4).
Tighten the screws with a torque of approx. 3 Nm.