Suitable Lubricants - BEKAWORLD BEKAONE120 Manual De Montaje E Instrucciones De Uso

Suitable lubricants

Multi-purpose grease, KP2K-30
(DIN 51825): Agip GR MU/EP 2
Lithium soap, mineral oil
V(40) = 110 mm²/s, NLGI 2
Service temperature range of the
lubricant: -30 °C to +120 °C
Operating temperature range of
BEKAONE120 with Agip GR MU/EP 2:
see chart
High-performance grease with
extended temperature range,
KP1/2 N-55 (DIN 51825):
Total Ceran XS 80
Calcium-sulfonate complex' thickener,
synthetic base oil
V(40) = 80 mm²/s, NLGI 1,5
Service temperature range of the
lubricant: -55 °C to +180 °C
Operating temperature range of
BEKAONE120 with Total Ceran XS 80:
see chart
For other lubricants (like e.g. bio-
degradble lubricants, lubricants with
H1-license and so on), please consult
BEKA.
Temperature
Temperature
Reference values for maximal number of discharges at lube point
without backpressure
Number of possible discharges may vary depending on the
backpressure of the lube point and the temperature. Therefore,
regularly check the correct function of the BEKAONE120.
In case of indirect assembly, keep the lubrication lines as short
as possible to avoid additional load on battery due to the
backpressure in the lines!
05 - Suitable lubricants
Agip GR/MU EP 2
Agip GR MU/EP 2 - directly installed
Agip GR MU/EP 2 - hose ø 8x1,30 cm
Agip GR MU/EP 2 - hose ø 8x1,100 cm
Total Ceran XS 80
Total Ceran XS 80 - directly installed
Total Ceran XS 80 - hose ø 8x1,30 cm
Total Ceran XS 80 - hose ø 8x1,100 cm
EN
-22-