Filling - BEKAWORLD BEKAONE120 Manual De Montaje E Instrucciones De Uso

06 - Filling

Pay attention to utmost cleanness when refilling the reservoir.
Use a hand-lever grease gun to fill the BEKAONE120:
1. Remove the activation cap.
2. Put the filling coupling straight onto the filling zerk.
3. Slowly fill the reservoir up to the marking „max.".
4. Disconnect the filling coupling and clean the filling zerk.
5. Put on the activation cap again.
Fill the lubricator slowly up to the marking max.
NOTICE!
to avoid possible pump damage due to overfilling.
-23-
EN
„ "