NEOiD PTZ CAMARA + Manual Del Operador página 137

WAN Connection
Please refer to the above diagram, user and the camera are in different routers,
they are considered as in a WAN; in this condition, application software iSmartCMS
can not search and find the camera automatically. User can still connect after below
conditions are satisfied: (1) Set camera's IP address as static IP address (2) Router of
the LAN where camera is connected supports Port Mapping. (3) Router of the LAN
where camera is connected has fixed public IP address. Follow below steps to
connect:
1. Set camera's IP address in LAN: connect user PC to the LAN (Router 1) where the
camera is connected according to LAN connection instructions, use application
software iSmartCMS to search and find the camera, then add it to manage; then set
camera's IP address in the same network segment as the router 1. Camera's
gateway is usually set at Router 1's LAN IP address, for example, 192.168.1.1, then
camera's IP address can be set as for example 192.168.1.179 or 192.168.1.180 as long as
they are in the same network segment.