NEOiD PTZ CAMARA + Manual Del Operador página 145

⚫Enable / Disable: enable / disable transparent transmission.
⚫Protocol: choose TCP or UDP protocols.
⚫Camera as: choose Client or Server.
⚫IP: when the camera is set as client, the IP address of the
transmitted camera is needed. When the camera is set as server, the
IP address can be left as black.
⚫Port: choose from 1-65535 as transparent transmission port.
UP.PM
After selecting the same model of the device to be synchronized
that is currently managed and unchecked, tick any or more of the
video parameters, audio parameters, and trace parameters, and
when you click the sync parameters, the device that you are
currently synchronizing will synchronize with the source device
parameters.