Usb Connection/ Room Sensor - cimuka CT Serie Manual Del Usuario

CT SERIES
USB Connection / Room sensor
Your model is equipped with a USB connection at the back
side of the control panel. It is connected to the main
controller.
A second room sensor is installed to it with sensor
Sensor protective cover
protective cover. Room sensor measures the temperature
and humidity conditions of the room.
Cimuka advanced temperature/ humidity controller provides
best control of cabinet for room conditions and it has
USB connection
second sensor voice alarm function for high/low
temperature/ humidity with user adjustable parameters.
Room sensor chip
(see page 10)
Room sensor chip is identical to the main sensor chip of the
egg incubator. It can also be used as a spare sensor for
emergency situations.
Usb connection can also be used for calibration sensors
and Iot module connections.
Connection device should be selected from user menu.
Please check user menu parameters. (see page 10)
Contact with your vendor for optional devices and
accessories that can be connected to USB connector
CAUTION!
Always power of the incubator during any
sensor or Iot module installation.
11