Humidity Tray - cimuka CT Serie Manual Del Usuario

CT SERIES

Humidity Tray

CAUTION!
Never fill humidity trays with cold water. Use warm water close to incubator set point. Ideally 25-30
CAUTION!
Humidity tray is part of the incubator. Always keep it in bottom, even empty. Advisable to fill one section of humidity tray
during setting period and keep full for hatching period last 2-3 day.
Keeping water in humidity tray gives many advantages to user and decrease the risk of incubation,
- Humidity tray is backup water supply in case your external water tank runs out of water or in case of unexpected system malfunction
TM
- Humisonic
Don't forget that humidity values depend on temperature values, always check humidity values at temperature set point.
You could not decrease humidity below a point and could not increase above a point. This low and up limits depend on humidity level of
your incubation room.
Lowest humidity
Unit life will increase with low working and less power consumption with low energy costs.
Highest humidity
13
0 0
C (77-86 F)