Diagnostic Host; Function Descriptions - MUCAR CS4 Manual Del Usuario

3.1.1 Diagnostic host

1.Diagnostic Cable: Standard OBDII diagnostic cable
2. LCD Display: 5 inch display
3.TF Card Slot:Support expandable SD memory card (please purchase by yourself)
4.TYPE-C Interface :TYPE-C port supports voltage 5V-1.2A, please do not exceed the
range.
5.System: ABS+SRS+ECM+TCM
6.Reset: OIL+ EPB+SAS+TPMS+ETS
MUCAR CS4 host computer
• Battery Capacity:600mAh/7.6V
• Screen Size: 5 inches
• Resolution: 480x854 pixel
• Working Voltage: 5V
• Working Current: ≤2.5A
• Working Environment: 32 ℉ ~122 ℉ (0 ℉ ~50 ℉ )
• Storage Environment: -4 ℉ ~140 ℉ (-20℃ ~60℃ )

4 Function Descriptions

The MUCAR CS4 host computer have 7 functions, namely, OBD, Scan, Maintenance &
Service, File, Repair Info, Setup and Update.
10
www.mucarco.com
www.mucarco.com
4.1 Diagnosis
System diagnosis: it supports more than 100 automo brands, smart diagnosis and
traditional diagnosis covering OBD II diagnosis.
System :ABS+SRS+ECM+TCM
Reset:OIL+ EPB+SAS+TPMS+ETS
Tips:Insert the diagnostic cable into the vehicle interface, and then click "Scan" on the
main interface. Then, select the model. After the communication is established, the system
starts to read the VIN of the vehicle.Prompt: If the communication fails, a prompt message
box will pop up on the screen. Follow the prompts on the screen to continue.
If it fails to read VIN, you need to enter VIN manually.
11