SilverCrest SKW 5 B1
9.2 "LO" is indicated on the display and the scales switch off
•
The battery is almost empty. Replace the battery with new battery of the same type. Please
note the instructions in the "Replacing the battery" section.
9.3 "EEEE" is indicated on the display
•
The weight exceeds the maximum load of 5 kg. Immediately remove the items from the
weighing surface (1) to avoid damaging the kitchen scales.
9.4 The scales are indicating wrong values
•
The scales must be re-calibrated. To do so, remove the battery from the scales, wait approx.
10 seconds and re-insert the battery. Then immediately place the scales onto a solid,
horizontal surface but don't apply any pressure on the scales. Wait until the scales indicate
"0 g". The scales have been re-calibrated and are ready to be used. If the scales don't show
"0 g", repeat the above steps.
10. Maintenance/cleaning
10.1 Maintenance
Repairs are required if the kitchen scales have been damaged in any way, for example if the
device housing is damaged, when liquids or objects have penetrated into the kitchen scales or
when the product has been exposed to rain or moisture. Repairs are also necessary if the product
does not perform normally or if it has been dropped. If smoke, unusual noises or smells are noticed,
remove the battery from the kitchen scales immediately. If this occurs, the kitchen scales should not
be used before they have been inspected by authorised service personnel. All servicing work must
be carried out by qualified specialist personnel. Never open the housing of the kitchen scales.
10.2 Cleaning
Only use a clean, slightly dampened cloth to clean the kitchen scales. Never use any aggressive
liquids. For stubborn dirt, add a little detergent to the damp cloth.
30 - English