Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
6
Care and maintenance
WARNING
Electric shock hazard! Attempting care and maintenance with the supply
cord connected to a power outlet can lead to severe injury and burns.
▶ Always unplug the supply cord before carrying out care and maintenance
tasks.
Care
•
Carefully remove stubborn dirt from the tool.
•
Use only a slightly damp cloth to clean the casing. Do not use cleaning
agents containing silicone as these can attack the plastic parts.
Maintenance
•
Check all visible parts and controls for signs of damage at regular
intervals and make sure that they all function correctly.
•
Do not operate the product if signs of damage are found or if parts
malfunction. Have it repaired immediately by Hilti Service.
•
After cleaning and maintenance, fit all guards or protective devices and
check that they function correctly.
To help ensure safe and reliable operation, use only genuine Hilti spare
parts and consumables. Spare parts, consumables and accessories
approved by Hilti for use with the product can be found at your local
Hilti Store or online at: www.hilti.group.
6.1 Replacing the supply cord
DANGER
Risk of injury! Risk of electric shock.
▶ The product may be serviced and repaired only by authorized, trained
personnel! This personnel must be specially informed of any possible
hazards.
If it is damaged, the supply cord has to be replaced.
Comply with the country-specific regulations for electrical safety.
1. Unplug the charger's supply cord from the power outlet.
2. Pull the rubberized foot out of the cover and remove the securing screw
exposed by removal of the rubberized foot.
Materials
Torx
screwdriver T10
®
3. Flip the cover open.
8
English
2
2275226
*2275226*
Publicidad
Tabla de contenido
