Metra 99-7805CH Instrucciones De Instalación página 3

3. Unclip and remove the shifter
panel including the cup holders.
(Figure D)
4. Unclip and remove the coin holder
from the 12-volt socket/coin holder
assembly. (Figure E)
99-7805CH
Dash Disassembly
(Figure D)
(Figure E)
5. Remove (1) Phillips screw under
the coin holder, and then unclip
and remove the 12-volt socket/
coin holder assembly. (Figure F)
6. Remove (4) Phillips screws
securing the pocket assembly then
unclip and remove the pocket.
(Figure G)
Continued on next page
3
(Figure F)
(Figure G)