Kit Assembly - Metra 99-7805CH Instrucciones De Instalación

ISO DIN radio provision
1. Attach (4) panel clips to the radio
trim panel using (4) panel clips
supplied. (Figure A)
2. Mount the pocket to the radio
brackets with (4) #8 x 3/8" truss-
head Phillips screws supplied.
(Figure B)
3. Mount the bracket/pocket
assembly to the radio trim panel
with (4) #8 x 3/8" Pan-head
Phillips screws supplied.
(Figure C)

Kit Assembly

(Figure A)
(Figure B)
99-7805CH
4. Slide the radio into the completed
assembly and secure with screws
supplied with the radio. (Figure D)
5. Attach the A/C vents to the
radio housing using the factory
hardware.
6. Attach the hazard switch to the
radio housing using (2) #8 x
1/2" Truss-head Phillips screws
supplied.
7. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
8. Reassemble the dash in reverse
order of disassembly.
6
(Figure C)
(Figure D)