Teac MC-D800 Manual Del Usuario página 21

To listen to a device connected to the auxiliary
input (AUX IN) jacks, press the PHONO/AUX button
and select "AUX" .
Each time you press the FM/AM button, the unit will
switch between FM and AM broadcast reception .
To listen to an FM station, press the FM/AM button
and select "FM" .
To listen to an AM station, press the FM/AM button
and select "AM" .
Each time you press the CD/Bluetooth/USB button,
the function will change as shown below .
CD Bluetooth
To listen to a CD, press the CD/Bluetooth/USB but-
ton and select "CD" .
To listen to a Bluetooth device, press the CD/
Bluetooth/USB button and select "Bluetooth" .
To listen to a USB flash drive, press the CD/
Bluetooth/USB button and select "USB" .
SOUND button
j
Use to adjust the bass and treble, as well as the left-
right volume balance (page 28) .
MUTE button
k
Use to temporarily silence the output (page 29) .
PAIRING button
l
Use this when pairing with other Bluetooth devices
and when ending Bluetooth connections (pages
44 and 43) .
DISPLAY button
m
Press when FM/AM or CD/Bluetooth/USB is selected
to show the current time .
Use to search for stations by program type (PTY)
(page 54) .
INFO button
n
When listening to an MP3/WMA file, use to change
the information shown on the display (page 40) .
When listening to FM radio, use this button to select
an RDS mode (page 52) .
MEMORY/CLOCK ADJ button
o
When listening to the radio, use when setting radio
p
USB q
station presets (pages 50 and 51) .
Use this when programming tracks/files and check-
ing programmed tracks/files (pages 34 to 37) .
Use to adjust the clock (pages 25 and 26) .
PLAY MODE/FM MODE button
When listening to a CD or USB flash drive, use to
change the play mode (normal, repeat, shuffle)
(page 38) .
When listening to FM radio, use to switch between
stereo and mono (page 49) .
VOLUME (+/−) buttons
Use to adjust the volume . Press the + button to
raise the volume, and press the − button to lower
the volume .
21