After Shaving; Cleaning/Maintenance; Cleaning & Maintenance; Cleaning - Targa SilverCrest SLSN 3 B2 Manual De Instrucciones E Indicaciones De Seguridad

SilverCrest SLSN 3 B2
•
Hold the lady shaver at a right angle to your skin and, in straight lines, run
it against the direction of hair growth.
•
Once you have finished shaving, push the ON/OFF switch (7) back into
its original position. The lady shaver will now stop.
•
We recommend using the cleaning brush (14) to clean the lady shaver
and attachment (10) after every shave. For details on how to clean the
lady shaver more thoroughly, please refer to section '9.

Cleaning/maintenance'.

8.7 After shaving

Immediately after shaving, avoid using substances that can cause skin
irritation, e.g., deodorants containing alcohol.
However, it is perfectly fine to apply a little cream or body lotion.
9. Cleaning/maintenance

9.1 Cleaning

•
Remove the protective cover (1) or attachment (10, 11, 12), if fitted. The
protective cover (1) and attachments (10, 11, 12) can be cleaned using
soapy water. Then dry it well.
•
The housing of the lady shaver can be wiped using a slightly damp
cloth; never use any aggressive cleaning agents.
•
Remove any remaining hair from the shaver head (6) using the cleaning
brush.
•
For a more intensive clean, you can remove the shaver head (6) from
the lady shaver. Using your thumb and forefinger, press the unlock
buttons (5) on both sides of the shaver head (6), pulling it upwards to
remove.
•
The head part of the lady shaver and the removed shaver head (6) can
be rinsed off under running water. Then dry the parts thoroughly. Do so
carefully to prevent damaging the shaving foil (2).
•
Then place the shaver head (6) back on in reverse; the trimmer locking
mechanism (4) must be positioned above the ON/OFF switch (7) when
doing so. Slide the shaver head (6) downwards until you hear it click
into place.
36 - English