Changing The Shaver Head; Storing The Device When Not In Use; Troubleshooting - Targa SilverCrest SLSN 3 B2 Manual De Instrucciones E Indicaciones De Seguridad

SilverCrest SLSN 3 B2

9.2.1 Changing the shaver head

•
To unlock the shaver head, press both
unlock buttons (5) at the same time;
these are located on the side of the
shaver head.
•
Keep the unlock buttons (5) pressed
and lift the shaver head upwards to
remove.
•
Now attach the new shaver head onto
the top of the lady shaver with the
trimmer locking mechanism (4) facing
the front.
•
Press the shaver head downwards
evenly until you hear it click into place.

9.3 Storing the device when not in use

If the lady shaver is not going to be used for a long period of time...
•
clean it as described in section '9. Cleaning/maintenance'.
•
Remove the batteries from the battery compartment.
•
Keep it in a cool, dry, clean place.
We recommend using the storage bag (15) when storing the device.

10. Troubleshooting

The lady shaver will not switch on.
•
Check whether the batteries are empty. If necessary, insert two new
LR6/Mignon/AA batteries.
38 - English