Unit Description - Binder 8012-0589 Manual De Conexión

Convertidor de interfaz rs485/rs422 para apt-com
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

GB

3. Unit description

The RS485/RS422 interface converter is independent electrical equipment with external power
supply via a 24V AC power supply unit. It can be loosely installed or mounted to clamping profile
bars in distributor boxes. By internal DIP switches and plug bridges different operational modes
can be set. The settings necessary for operating temperature chambers of the BINDER GmbH
have already been pre-set by the BINDER GmbH.
The operating mode for BINDER chambers according to the original W&T user manual is on the
RS422 connection side "RS 485, 4-wire-bus-master" and on the RS485 connection side
"RS485, 2-wire-bus-master". For standard settings for BINDER chambers refer to Figure 3.
Both connection cables and the power supply unit are included with the scope of delivery.
The connected temperature chamber(s) are addressed via this COM interface and the address
that can be individually adjusted at each chamber controller.
Figure 1: Connected interface converter
Connection of converter RS422/RS485 09/2016
Page 8/21

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

8012-0599

Tabla de contenido