Networking - Binder 8012-0589 Manual De Conexión

GB

5. Networking

RS485 temperature chambers are connected via the RS422/RS485 interface converter.
Art. no. 5023-0111
Figure 2: Networking via RS422/RS485 interface converter
The chamber address required for the unambiguous chamber identification must be entered by
hand individually and only once at the controller of each temperature chamber or measurement
device. For a description see the respective operating manual of the chamber or device bearing
an RS485 interface.
Connection of converter RS422/RS485 09/2016
Telephone
dialing device
TWG 01
Alarm
30
Box
3
KBF
E5.3
BD
2
ED
FD
™
APT.line (E2)
RS422
RS485
Cable 5m
KBF
E6
Cable 5m
Art. no. 5023-0111
1
Page 10/21