JVC KW-AVX836 Manual De Instrucciones página 29

Menu item
Picture Adjust
Aspect
Language
NTSC/PAL
Selectable setting/item
You can adjust the following to make the screen clear and legible for watching
the playback picture. The setting will be stored—one for "DISC/USB"
(common) and the other for "AV-IN."
5 ∞
Press [ ] or [ ] to adjust. (–15 to +15; Initial 00)
Bright : Adjust if the picture is too bright or too dark.
♦
Contrast : Adjust the contrast.
♦
Color : Adjust the color of the picture—lighter or darker.
♦
Tint : Adjust the tint if the human skin color is unnatural.
♦
• You can adjust the tint only when <NTSC/PAL> is set
to <NTSC> (see below). In other cases, <Fix> appears
and the tint cannot be adjusted.
You can change the aspect ratio of the picture.
• Not adjustable when no picture is shown.
Regular:
For 4:3 original pictures
Full:
For 16:9 original pictures
Panorama:
For viewing 4:3 pictures
naturally on the wide screen
Auto:
Select the indication language shown on the screen.
English, Español, Français, Deutsch, Italiano, Nederlands, Svenska,
♦
Dansk, Руccĸий, Português,
Türkçe, ,
• The characters you can enter for assigning the titles also change according to
the language selected. (
• Turn off the power and on again so that your setting takes effect.
Select the color system of the external monitor.
NTSC, PAL
♦
• This setting is valid only to the external monitor connected.
29
Aspect ratio of the incoming signal
4:3
• For "DISC": Aspect ratio is automatically
selected to match the incoming signals.
• For the other video sources: Aspect ratio is
fixed to <Regular>.
, ,
51)
Initial: Underlined
16:9
, ,