Roca DFK 75AG Instrucciones De Instalación página 21

After installation test and
check operations
Test operation
(Fig. 19)
1. Prior to test:
(1)Do not connect the unit until com-
pletely installed.
(2)Wiring should be correct and safe.
(3)Valves should be open.
(4)The unit should be free of impurities.
2. Test operation method:
(1)Connect the unit and press ON/OFF
button on the remote control unit.
(2)Press the MODE button to make sure
Wiring
Heat pump
POWER SUPPLY
230V/1Ph/50Hz
L N
INDOOR UNIT
Cool only
INDOOR UNIT
All manuals and user guides at all-guides.com
all three modes are operative:
COOL, HEAT, DEHUMIDIFICATION.
3. Emergency method.
Whenever the remote control unit can-
not be used, proceed as follows:
* With the unit off, press AUTO to acti-
vate. The unit will operate in the cor-
responding mode.
* With the unit on, press AUTO to turn
it off.
Note: The TEST mode is for testing pur-
poses only. Do not use as a regular operat-
ing mode.
POWER SUPPLY 3 WIRES
(L,N, ) 230V/1Ph/50Hz (SUPPLIED)
DBK 75 AG
MANEUVRE CONNECTOR
INDOOR UNIT
5 WIRES SUPPLIED
DBK 100 AG
DBK 120 AG
POWER SUPPLY 3 WIRES
(L,N, ) 230V/1Ph/50Hz (SUPPLIED)
DFK 75 AG
INDOOR UNIT
MANEUVRE CONNECTOR
4 WIRES SUPPLIED
POWER SUPPLY 3 WIRES
(L,N, ) 230V/1Ph/50Hz (SUPPLIED)
DBK 100 AG
DBK 120 AG
MANEUVRE CONNECTOR
4 WIRES SUPPLIED
DBO 75 AG
OUTDOOR UNIT
MANEUVRE CONNECTOR
3 WIRES SUPPLIED
MANEUVRE CONNECTOR
3 WIRES SUPPLIED
DBO 100 AG
DBO 120 AG
OUTDOOR UNIT
MANEUVRE CONNECTOR
4 WIRES SUPPLIED
DFO 75 AG
OUTDOOR UNIT
MANEUVRE CONNECTOR
2 WIRES SUPPLIED
DBO 100 AG
DBO 120 AG
OUTDOOR UNIT
MANEUVRE CONNECTOR
5 WIRES SUPPLIED
GB
Fig. 19
L1
3 WIRES
N
230V/1Ph/50Hz
L1
L2
5 WIRES
L3
400V/3Ph/50Hz
N
L1
3 WIRES
N
230V/1Ph/50Hz
L1
L2
5 WIRES
L3
400V/3Ph/50Hz
N
21