Check After Installation - Roca DFK 75AG Instrucciones De Instalación

Check after installation

Check
Is the unit secured firmly?
Has a check for leaks been carried out?
Is heat insulation sufficient?
Is drain correct?
Is power supply in compliance with the identification plate?
Is installation correct and safe?
Is grounding correct?
Is power supply cable as specified?
Are air intake and discharge blocked?
Is refrigerant charge in compliance with piping distance?
ATTENTION
Your product is marked with this symbol. This means that at the end of its service life it should not be mixed
with other non-classified household waste. Therefore, disposal should be carried out in compliance with the
corresponding local and national regulations, in a correct and environment-friendly manner.
The dismantling of the air conditioning unit, as well as the processing of refrigerant, oil and other compo-
nents, should be carried out by a qualified technician and in compliance with the applicable legislation.
Contact your local authorities for further information
Data and dimensions are subject to change without prior notice.
22
All manuals and user guides at all-guides.com
The unit could fall, move or generate noise.
Could cause insufficient cooling capacity.
Could cause condensation and stalling.
Could cause condensation and stalling.
Could damage the unit.
Could damage the unit.
Could cause electric discharges.
Could damage the unit.
Could decrease cooling capacity.
Cooling capacity is not optimum.
GB
Possible malfunction