Additional Safety Warnings - MIRKA DEROS 550 Manual Del Usuario

WARNING
• A lways wear required personal safety protection in accordance with manufacturer's instructions and local/national
standards while using this tool .
• Always attach the screw cover cap after assembling the backing pad.
• Do not use a power tool if you are tired or under the influence of drugs, alcohol or medication.
• Read the Materials Safety Data Sheet (MSDS) for the work surface.
• Use the tool with dust extraction. A suitable dust extraction unit will reduce hazardous dust.
• D o not overreach. The operator must always stand in a secure position with a firm grip and firm footing on a solid
floor.
• D o not wear loose clothing or jewellery. Keep hair, clothing and gloves away from moving parts. Loose clothes,
jewellery or long hair can get caught in moving parts .
• I f any physical hand/wrist discomfort is experienced, stop working and seek medical attention. Hand, wrist and arm
injury may result from repetitive work, motion and overexposure to vibrations .
• D o not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust or fumes .
CAUTION
• R emove pad wrench before connecting the tool to the power source.
• K eep work area clean and well lit.
• A lways ensure that the work piece to be sanded is firmly fixed in place.
• B efore changing the abrasive always disconnect the power source. Make sure the abrasive is perfectly centred and
firmly attached to the backing pad.
• K eep children and bystanders away while operating a power tool. Distractions can cause you to lose control of the
tool .
• A lways pay attention to work safety. Never carry, store or leave the tool unattended with the power source
connected .
• K eep hands clear of the spinning pad during use.
• D o not allow the tool to free speed without taking precautions to protect surrounding people and objects in the
event that the abrasive or backing pad should come loose .

Additional safety warnings

• R ead all instructions before using this tool. All operators must be fully trained in the proper, safe use of this tool.
• A ll maintenance must be carried out by trained personnel. For service, contact a Mirka authorized service centre.
• A lways use the tools with a residual current device (RCD) with a rated residual current of 30 mA or less.
• T he power supply socket and connector are non-IEC appliance couplers. Only use an original Mirka power supply
cable . The Mirka power supply cable can be bought from your Mirka Dealer .
• C heck the tool, backing pad, power cord and fittings regularly for wear.
• C lean or replace the dust extractor´s collection bag daily. Dust can be highly combustible. Cleaning or replacing the
bag also assures optimum performance .
• A lways ensure that the power tool specifications correspond to the power source (V, Hz).
• T ake care to prevent clothing, ties, hair, cleaning rags, etc. from getting caught in the tool's moving parts.
• I f the tool appears to malfunction, stop using it immediately and arrange for service and repair.
All manuals and user guides at all-guides.com
Mirka® DEROS • 125 mm (5") & 150 mm (6")
en
43