Parrot CK3000 Manual Del Usuario página 19

ENGLISH
PAIRING WITH MOTOROLA V500, V525, V600
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
Parrot CK3000. Once this is done, connection between your telephone and your hands-free kit will take place automatically
as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is
established.
Procedure:
IMPORTANT: The CK3000 hands-free kit is only operational when the vehicle's ignition is switched on.
With your telephone switched on; switch on your vehicle's ignition. The two indicators that light on the buttons show that
your hands-free kit is powered up. Then perform the following sequence using your telephone.
Call up the Configuration menu the select Connection.
Choose Bluetooth Link, then Hands-free.
Now you need to search for your kit. You will need to choose Find Equipment and wait.
Choose "Parrot CK V..". Answer Yes when prompted to couple your telephone and your kit. Enter 1234 in the Bluetooth
password entry screen and validate it.
Now you are connected with your kit.
COMMUNICATING
Manually initiating a call:
Enter the number to call using the telephone key pad.
Initiating a call using voice recognition:
Press the green button, wait for the audible signal [beep] and pronounce you contact's name.
Assigning voice prints to the names in your phonebook in the CK3000:
Press the red button for a long period of time, choose Yes, then follow the prompts displayed.
Dual call:
The second call waiting is indicated by a beep heard from the speakers. Pressing the green button will answer
this call. Use the green button to toggle between the calls. Pressing the red button ends the current call.
Adjusting the Volume:
Use the buttons on the side of the telephone.
Discrete mode:
Briefly press the green button to switch the conversation between hands-free or telephone modes.
Redial function:
To redial a previously dialed number, press the green button at length.
IMPORTANT:
You cannot change the voice prints stored in the kit individually. The only way to change a voice print (name or
telephone number) is to clear the memory then to restart the voice print recording process.
All manuals and user guides at all-guides.com
MOTOROLA
19