Parrot CK3000 Manual Del Usuario página 3

ENGLISH
IMPORTANT: CK3000 operates only when ignition is switched on. Both lights on a Keypad must be on.
IMPORTANT: Before using CK3000 you must pair it with your phone. See instructions below.
IMPORTANT: Press the red and green buttons simultaneously for clearing the memory. Clearing the memory
PAIRING WITH NOKIA 6310, 6310I, 8910, 8910I, 6650 AND 7600
When you switch on for the first time or when you perform a new installation, you need to pair your telephone and your
Parrot CK3000. Once this is done, connection between your telephone and your hands-free kit will take place automatically
as soon as the two devices are less than a few meters apart. A 'beep' will be heard, indicating that connection is
established.
Access the Menu and scroll Ú to "Bluetooth®", press "Select". Find "On" to activate Bluetooth®.
Ú To "Search for audio accessories", press Select.
The display reads "Searching for devices". Please wait.
The display reads "Parrot CK v...", press "Select" to make the connection.
The display reads, "Enter password", enter 1234 then " Select".
From now on, when you press the keys on your phone, you should hear the sound coming through your vehicle
loudspeakers.
After getting into your car and turning of the ignition key, your telephone
should ask you whether you wish to establish the Bluetooth® connection
with CK3000. If you want to, you can disable this function. To do that, go
into the Menu, and select "Bluetooth®" using the up and down buttons.
Then, scroll until "view paired devices", press "Select".
<Parrot CK3000> appears, click on "Options".
Scroll until «Request conn. Authorisation», enter «Select».
For more information, consult your Nokia phone user's guide.
LEARNING NAMES
To assign a voice tag to a name, access your directory by scrolling with the Ù? or Ú? keys. Find the desired name and click
on "Details", then "Options". Find "Add voice tag" and click on "Select".
The following message is displayed: "Press Start then speak after the tone".
Then press "Start" and say the name.
To remove the voice tag for any name, access your directory by scrolling through the Ù ? o r Ú? k eys and click on "Details",
then "Options". Find "Voice tag" and click "Select".
By clicking "Change", you can re-record over the voice tag.
By clicking "Erase", you will delete the previous voice tag recording.
All manuals and user guides at all-guides.com
requires repeating the pairing phase.
NOKIA
3